Description
Feature: Be able to control temperature and humidity at the same time. Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time. Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change.Same as humidity Control. Supporting Temp and Humidity Calibration Dual Display Window,Be able to display measured temperature/humidity and set temp/humidity at the same time Specification: Model: STC-3028 Input voltage: AC110~220V, DC24V, DC12V (select the power supply when placing an order) Measuring temperature range: -50°~+110° Measuring humidity range: 00%RH~+100%RH Accuracy: ±1°, 0.1%RH Relay output contact capacity: 10A/240VAC Shell material: PC + ABS fireproof Sensor length: 1m Wiring diagram of power supply with the same load: Load independent power wiring diagram: When starting temperature > stop temperature=refrigeration mode When starting temperature < stop temperature=heating mode When starting humidity>stopping humidity=dehumidification mode When starting humidity>stopping humidity=dehumidification mode Temperature calibration: Press and hold 2 buttons at the same time, and 3 seconds display (0.0) for will be able to adjust the value (increase or decrease) Humidity calibration: Press and hold 2 buttons at the same time, and 3 seconds display (0.0) for will be able to adjust the value (increase or decrease) Restore factory settings: After connecting to the power supply (press and hold the two buttons on the example diagram at the same time), the display (888) will automatically return to the actual temperature interface (it will be successful to restore the factory settings)